EEW 6.0 Bobbin (3d print friendly)

I have released a different version of this bobbin that prints in 4 parts instead of 3. However, by breaking this into 4 pieces it requires less supports and the final print is nicer.

BobbinDisk 2 and BobbinTube do not require supports.

BobbinDisk1a and BobbinDisk1b get glued together.

For each bobbin you will need two R6-2RS bearings (https://www.mcmaster.com/60355K703/). You can find these bearings on Amazon.

A trick to install the bearings into the bobbins is shown here: 

For more fiber tools see our store at: www.dreamingrobots.com