Ender 3 4.3 inch touchscreen mount

Hi, this is my first model upload so if anything is missing post a comment,recommended need and if possible I will get that resolved

Things required to assemble

The Screen itself I use this

4 M3x6 Screws

4 M2.5x4 Screws (you can also use M2.5x6 screws)

2 M5 Scews (can be any length if you already have the screw that is used to mount the ender electronic box or screen you can use that)

both parts of the model needs to be printed

the backing can use any infill I use 10% on mine

the frame should be printed at 100% infill lower is usable but not recommended

Assembly Instructions

1. Print Both Parts
2. connect the DSI display cable
3. attach the screen onto the backing plate using M2.5 screws
4. attach the backing plate with the screen onto the frame using M3 Screw
5. If you're using an ender 3 v2 or S1 you will need to tap the screw hole
6. attach the Display assembly to the printer using M5 screws
7. setup the display like you would
8. Done!