Angle Leg Support - Cornhole

I designed and 3D printed a Angle Leg Support for my cornhole boards. The design I made was for a 1x3 (actual size 0.75 x 2.50) frame. The 4 countersink holes are for a #8 wood screw. The regular hole is a 3/8 hole for a 3/8 bolt. The width of the leg I used was 1.5"

Printer: Ender 3 V2

Rafts: Doesn't Matter

Supports: Yes

Resolution: .2mm

Infill: 20%

Filament brand: Overture 3D

Filament color: Black

Filament material: PETG