Steam deck Veneer

PLEASE READ THE DESCRIPTION BEFORE YOU PRINT!!

If you are not up for a Dbrand skin mod maybe this very decent optical mod will hit your taste buds.
Not only does it look really stylish, it also prevents skin shaving and other human slime piling up in the gap between front and backshell.

The provided File most likely need some tinkering as a perfect fit could be just a 10th of a Millimeter apart. Depending on your printers Flow rate, allover condition of your nozzle etc. you most likely will have to change scale values and do a few prints before you get the perfect fit. The Veneer should go in between the gap without to much force and held by friction alone. It surely will take a few tries but the Result is really amazing.

The Veneer is longer on purpose as the ends tend to be thicker then the middle part so you have to trimm both ends with a side cutter.

Dont forget to save your values once dialed in so when your up for a color change you just have to press print and done.