Easy print kokanee dodger

Another kokanee dodger, this one a bit more triangular, based on 'inspiration' from a new dodger on a facebook group. You 3d print this one flat, with 100% infill, and all concentric infill and exterior. When you heat it back up with a heat gun, boiling water, a hair dryer, etc, it will curl up along the concentric lines, virtually folding itself into the finished dodger. Finish it off with split rings and reflective stickers, and you have a pennies-on-the-dollar dodger.

One model is 2mm thick, one is 3mm. They're both plenty strong and the 2mm bends extremely quickly under heat.

Print Settings

Printer Brand:

TEVO

Printer:

Rafts:

No

Supports:

Resolution:

0.3mm

Infill:

Filament: Atomic PLA Pearl aqua

Notes:

Add split rings, swivels, and stickers.