RepRack Hanger for IKEA HUGAD 28mm

Since EMT is hard to find in Germany I re-designed the hangers so they can be used with the IKEA HUGAD curtain rods (28mm - version || https://www.ikea.com/de/de/p/hugad-gardinenstange-weiss-10217141/ )

Designed so that two pieces (mirror one) fit on a 250x250mm print plate together with a pair of printable wall cleats.

Secure the rod in place by adding two 3mm heat-set inserts ( https://www.prusa3d.com/product/threaded-inserts-m3-standard-100-pcs/ ) or directly screw in an M4 bolt.

I recommend printing them from PETG with at least 3 perimeters.

Compatibility with IKEA HUGDA