Engine mount (Ø42mm)

This is a simple 42mm diameter motor mount. Inside there are 6 M4 nuts. I used 6 M4x35 screws to fix the motor. I used 3 types of fastenings:

1. ordinary
2. with a notch, e.g. for brushes protruding from the motor
3. with an M3 nut inside to fix the electronics
   External holes are dimensioned for M4 screws

Print instructions

Category: Machine Tools Print Settings

Printer Brand: Prusa

Printer: I3 MK3S

Rafts: No

Supports: No

Resolution: 0,3

Filament: Prusament PETG