This is a redesign of the original Gjallarhorn uploaded here. With this redesign it prints faster and is much sturdier.
Some elements were taken from the original gjallarhorn to help me make it faster. This uses a 75mm / 2 ½ inches PVC pipe and a 90mm / 3 inches PVC pipe. There is a Printable reduction connector in the zip folder.
This model was hand painted by the talented Sarah Wade.
Below is a video on how the gjallarhorn was assembled.
Print all the parts as they import. the total print time for me was 3 days / 70 hours cut the 90mm pipe 440mm long cut the 75mm pipe 750mm long
The author hasn't provided the model origin yet.