Iron Man MK50 Reactor

This is a working project, updates to come as done.

This is a rebuild of MK50 from scratch based on the design from Punished Props the original can be found here, I tried to use the EL paper but each time it would only light up a part after cutting to size.

I recreated this mainly to fit WS2812B LEDs but also just to see if I could, anyway I have included the Arduino code, that used 36 LEDs in a bank of two, and a switch to change colour.

Diffuser is connected to the LED panel with Blue Tack to get the high to defuse.

Worth looking at Punished Props build video if you ware to go down the EL Panel route.
 

Updates to come as done