Flash lamp holder for NiceHome automatic garden gate

I wanted to fix the flash lamp on the top of the pillar of the gate and the support delivered was not adapted... so I designed and 3D printed one

The original support is made to fix the lamp along the pillar or wall. If you want to it on the pillar or wall itself, you need to have electrical cables arriving bellow the lamp which wasn't the case for me. The new one has just the bottom part and can be powered from the side. 

It was designed using Fusion 360 based on the original one. Cable hole diameter has to be adjusted depending on used electrical wires (1 for antenna and/or one for the lamp itself)

Printed on my Prusa MINI+ with Prusament PETG Orange and using PrusaSliser standard parameters with 0.20mm layer height

On top of .stl and .3mf files I uploaded Fusion 360 .f3d one so you can modify the design and adapt it to your needs

As usual, feedback and comments (and for sure "likes") will be always welcome. Feel free to post nice pictures of your makes

Enjoy

If you like this model, take a look also at my other designs