check it!

check it! to do list and progress bar are made to work with Post-it notes. Or use them to hold any paperwork or photo that benefits a check mark or progress tracking.

Current check it! variants are:

• single check it!
• check it! 5 times
• check it! 10 times
• check it! to do list
• check it! empty label
• 0 - 50% - check it!

Thanks to a great suggestion by @p.palm, magnets can now be glued or embedded.

check it! prints-in-place without supports. Tolerances should be loose enough for most printers. I printed check it! with a 0.4 mm nozzle, 0.2 mm layer height, 2-3 perimeters, 3 bottom & top layers and 10%-13% infill.

The back has holes for 6mm neodymium magnets. To embed the magnets use 6x2mm magnets!

Multi-color printing check it! is easy. Just pause when the check mark starts printing and switch color. You can even print them in three colors, the sliders are higher than the text! Or print in a light color and use a marker to accentuate. 

I have added a check it! with room for a custom label.

I hope you enjoy check it!