Giant Lego inspired Minifigure : Ponko Punk Rocker

Giant Ponko is an animated minifig scaled to 10x normal size (based on Lego Serie 4 Punk rocker minifigure).

Ponko plays music when you push guitar's buttons.

• Body back receives 2 servomotors like MG90
• Neck receives 1 servomotor like MG90

• Body_Back receives 1 RPi
  The two parts of crest must be glued.

  Bottom and middle of the head must be glued.

If you don't want to use servomotors, you can print "NOServo" parts instead of "Servo" parts.

All parts are fixed with M3 bushes and screws.

Electric guitar STL files are here : https://www.prusaprinters.org/prints/21724-electric-guitar-for-ponko-giant-lego

Code for this giant project is available on Naoned Makers Github : https://github.com/naoned-makers/ponko

Print instructions

Category: Construction Toys Print Settings

Printer Brand: Prusa

Printer: I3 MK3S

Rafts: No

Supports: Yes for some parts

Resolution: 0.20

Infill: 10

Filament: PLA Dailyfil Pink and Blue + Formfutura Black + Fiberforce Yellow