Pen Ball
Description
PDFThis is a customizable (parametric) 3D printable writing aid. The pen ball makes it easier to grip a pen, pencil, or other writing utensil and may be useful for someone who has difficulty holding a pen or pencil directly.
The diameter of the ball and the writing utensil diameter are available in different sizing and are able to be customized further if needed. There are multiple sizes available for this device for both the device size and pen hole size.
Print Settings
Infill: 20%
Resolution: 0.2mm
Supports: No
Rafts: No
Sizing Guide
| Pen ball version | Pen hole size | Ball diameter (mm) | Maximum Pen Hole Diameter (mm) |
|---|---|---|---|
| Small pen ball | Narrow | 50 | 5 |
| Standard | 50 | 10.5 | |
| Wide | 50 | 12.5 | |
| Medium pen ball | Narrow | 60 | 5 |
| Standard | 60 | 10.5 | |
| Wide | 60 | 12.5 | |
| Large pen ball | Narrow | 70 | 5 |
| Standard | 70 | 10.5 | |
| Wide | 70 | 12.5 |
Assembly
Additional Documentation
https://github.com/makersmakingchange/Pen-Ball
About Makers Making Change
Makers Making Change is an initiative of the Neil Squire Society, a Canadian non-profit that empowers people with disabilities through technology.
We leverage the capacity of community based Makers, Disability Professionals and Volunteers to develop and deliver affordable Open Source Assistive Technologies.
🔸 Volunteer to print a device
🔸 Tackle a design challenge
🔸 Submit an assistive device idea
Tags
Model origin
The author hasn't provided the model origin yet.
