Raspberry Pi HQ Camera Case, Hyperpixel Style

A remix of Adafruit's modular Pi HQ Camera case to fit a Pimoroni Hyperpixel 4.0 display.
4h 56m
1× print file
0.10 mm
0.40 mm
28.00 g
19
78
1
1507
updated May 30, 2022

Description

PDF

Love Adafruit's Raspberry Pi HQ Camera Case? Love the beautiful Pimoroni Hyperpixel 4.0 display? Now they can play together!

This page contains the two models required to make the Hyperpixel 4.0 work with the Adafruit-designed case - a “case” and a “cover”. The rest of the components are available at the original page.

https://www.printables.com/model/32718-raspberry-pi-hq-camera-case

Printing Notes

There are some fine features on the cover plate that print a bit better at a 0.10 layer height, so that's what I used for my final test prints. Larger layer heights should work just fine though.

I also tweaked the slicer settings to increase perimters so that no infill was used, which makes translucent PETG prints look a bit nicer in some cases. Neither of these should be required to actually make use of the models though.

Tags



Model origin

The author remixed this model.

License