PAMS Camera Quick Clamp

The Camera Quick Clamp is an 3D printed adapter for attaching an assistive device to a section of 1/2 inch PVC piping. The clamp has a ¼”- 20 UNC camera thread stud that is compatible with various assistive devices and/or camera mount adapters. It can easily be installed, adjusted, and removed by hand.

The PVC Assistive Mounting System is a collection of readily available commercial-off-the-shelf components and 3D printed components that can be assembled into various configurations to provide mounting solutions for assistive technology.

Print Settings

Infill: 20%

Resolution: 0.2mm

Supports: No

Rafts: No

Bill of Materials

https://github.com/makersmakingchange/PVC-Accessible-Mounting-System/tree/master/Components/PAMS_Camera_Quick_Clamp

About Makers Making Change

Makers Making Change is an initiative of the Neil Squire Society, a Canadian non-profit that empowers people with disabilities through technology.

We leverage the capacity of community based Makers, Disability Professionals and Volunteers to develop and deliver affordable Open Source Assistive Technologies.

🔸 Volunteer to print a device

🔸 Tackle a design challenge

🔸 Submit an assistive device idea

🔸 Follow us on Instagram, Facebook, and Twitter