Spoke magnet holder small

Spoke magnet holder for 8x3mm round magnet.

M3 screws 5 to 10mm should fit.

Print Settings

Printer:

I3 Mega

Rafts:

Doesn't Matter

Supports:

No

Resolution:

0.1

Infill:

10

Notes:

Printed at 108% in Cura worked best.
you should use a brim.

Post-Printing

install on spoke

hotglue the magnet in.
heat the spoke up a little with a lighter then tighten the screws.

Tapping the hole may be necessary.