Light Up Christmas Decorations - Snowman and Tree
Description
PDFLEDs are awesome, 3D printers are awesome, what could be better than a combination of the two!
Print these hollow and put an LED tealight inside for a bright, festive decoration. Print any colour you want.
I made a Destiny Ghost model (linked as a remix), and had to buy the LED tealights, however since they came as a pack of 20 and I only needed 1 I had a lot spare! You can find a link to buy the LED lights from ebay on the Destiny Ghost page, but I bought mine from Amazon: http://www.amazon.co.uk/gp/product/B00BVYS3R6?psc=1&redirect=true&ref_=oh_aui_detailpage_o08_s00
Print Settings
Printer:
Mini Kossel
Rafts:
Doesn't Matter
Supports:
No
Resolution:
0.2mm
Infill:
0%
Notes:
Print with 2 perimeters and 0% infill.
You can try printing with a single perimeter and spiral vase mode, but I had better luck with 2 perimeters. If you do make it work, please let me know!You can use any layer height, but it is important to use 0% infill to make the light show through properly.
Tags
Model origin
The author marked this model as their own original creation. Imported from Thingiverse.