Nintendo Gameboy inspired Wall Print decoration

Hello, there 👋

I've seen and photographed such a large wall decoration at a friend's House.

He had bought these at some gaming convention.

Unfortunately I couldn't find such a model anywhere so I decided to just design and print it myself.

Dimensions:

• The dimensions of the cross are: 20x20x2cm
• Those of the Rings : 9x9x2cm
• Those of the long white buttons : 9x2x2cm

I made the cross to make full use of the print bed from my Ender 3V2

So if you have a larger or smaller printer, you can of course adjust the dimensions to your print bed in your slicer. 🤯

I added 2 different versions as STL file, one with and one without holes on the back, the holes are for nail fixing. 

at the long bottom buttons it in not possible to make a hole on the back because of the angle

I just attached mine to the wall with double sided tape, this also holds up really well.

I would be very happy if you would post your makes.

Thank you and happy printing 👍