Faster_Temp_Tower

Important Information
At a 0.2 layer height, you should have luck setting your Gcode up with this info
You can change the temps per layer to your own this is just what I use...

PLA, & TPU
180°c @ Layer 1
185°c @ Layer 35
190°c @ Layer 70
195°c @ Layer 106
200°c @ Layer 140
205°c @ Layer 175
210°c @ Layer 210
215°c @ Layer 245

ABS, & PETG
220°c @ Layer 1
225°c @ Layer 35
230°c @ Layer 70
235°c @ Layer 106
240°c @ Layer 140
245°c @ Layer 175
250°c @ Layer 210
255°c @ Layer 245