Lunging Elephant

Remixed a single model into a pose I wanted. I flipped the model 180 to save on filament.

It is a little head-heavy, though small amounts of sanding the front left side of the model have fixed it.

Printed on a wanhao clone; the monoprice maker select plus

I printed it with colorfab bronzefill at:

-Print speed: 50 mm/s

-Extruder temp: 205C

-Bed temp: 0C with green painters tape

-With a brim + supports

-Flow at 104%

Picture is "as is" and not cleaned up at all.

Print Settings

Printer Brand:

Wanhao

Printer:

Rafts:

Yes

Supports:

Resolution:

0.1 mm

Infill: