Seek Compact high mag lens

I made this to inspect some 350um parts with my Seek Compact Pro XR. Enabled my camera to see down to 20um pretty easy.

Note. You have a pretty low working distance with this setup. I have one that is longer but  finalizing the lenses and design for that one and will add that when it is finished as well as a part list for the lenses to get to build that.

You will need a 12mm ZnSe lens for this. Pick the appropriate one for your application.  Focus as normal. Tested on my printer in Quantum PLA and it works perfect but you may need to scale depending on how accurate your printer is.  You can hold it by hand to inspect 350um parts however i recommend using a stand.