mini Grundhobel / Compact Router Plane

kleiner Grundhobel zum glätten von Nuten. Compact Router Plane for smoothing grooves.
18
47
1
707
aktualisiert 29. Mai 2022

Beschreibung

PDF

Der “mini Grundhobel” zum glätten von z.B. Nuten wurde während eines Twitch Streams entworfen, modelliert und gedruckt. Die Bodenplatte kann ausgewechselt und bei bedarf auch aus anderen Materialien wie z.B. Holz, Acryl oder Mineralwerkstoff CNC-gefräst werden. Die Gewinde werden mittels Lötkolben in das Druck-Teil geschmolzen.

(die Anleitung kann auf den Projektbildern nachvollzogen werden)

Druckdaten:

  • Material: PLA
  • Schichthöhe: 0,28 mm
  • Infill: 15%
  • Schichten oben und unten: 4
  • Wandlinien: 4
  • Stützstruktur: größtenteils keine / teilweise konzentrisch

Benötigte Materialien:

  • PLA
  • 1x Gewindeeinsatz M5S x 5,8 mm (Schmelzgewinde)
  • 1x Rändelschraube M5 x 10 mm
  • 3x Gewindeeinsatz M4 x 8,1 mm (Schmelzgewinde)
  • 3x Senkkopf Schraube M4 x 10 mm
  • Ersatzeisen für Veritas Kleiner Grundhobel (Artikelnummer 703641)

 

→ENGLISH VERSION ←

The “compact router planer” for smoothing e.g. grooves was designed, modeled and printed during a twitch stream. The base plate can be replaced and, if necessary, CNC-milled from other materials such as wood, acrylic or solid surface material. The threads are melted into the  parts using a soldering iron.

(the instructions can be found on the project images)

Print data:

  • material: PLA
  • layer height: 0,28 mm
  • infill: 15%
  • top and bottom layers: 4
  • wall layers: 4
  • support structure : mostly none / partly concentric

Required materials:

  • PLA
  • 1x Threaded insert M5S x 5,8 mm
  • 1x Knurled screws M5 x 10 mm
  • 3x threaded insert M4 x 8,1mm
  • 3x Countersunk head screw M4 x 10mm
  • 1x Replacement Blade for Veritas Compact Router Plane (Article no. 703641)

Tags



Herkunft des Modells

Der Autor hat die Herkunft des Modells noch nicht angegeben.

Lizenz