Mario Star Christmas Tree Topper Dual Color
Description
PDFThis is a dual color rendition of the famous Mario Star tree topper.
Print Settings
Printer:
Creality CR-10
Rafts:
No
Supports:
No
Resolution:
0.28mm layer height
Infill:
2% fast honeycomb for main part, 0% for accent
Notes:
I've used the M600 gcode command to change filament when changing from the main part to the accent. Also, they were separate STLs so that the main part has a solid top to print the accent onto. That allowed me to have a much lower infill percentage than if I had to print the accent onto the infill.
I modeled this in TinkerCAD based on a sprite. The cubes were a base of 10mm x 10mm, resulting in the original size of 150mm x 160mm. I made the main part 35mm tall and the accent another 5mm. The cutout in the mainpart is a 25mm diameter cylinder.
Category: DecorTags
Model origin
The author marked this model as their own original creation. Imported from Thingiverse.