Fluffy Ball

3D printed Fluffy Ball
A cool toy for a Christmas tree, car mirror, or any place that lacks a useless dust collecting thing
-Models must be combined in the slicer
-Good blowing for the bridges is necessary
-It is better to increase bridges flow rate
-Only flexible materials such as SBS or PETG should be used
-The layer thickness is 0.12 mm. Needle width 1.2 mm, height 0.24 mm
-If slicing fails, try changing the extrusion width (reduce)
-To improve compatibility between bot_mor and bot_ten, you can use a parameter like XY Size Compensation/ negative Horizontal Expansion/ Other or reduce the flow for both