Chess Figure Set Dubrovnik [FIDE-Kingsize 3.75"] - mod easy-to-print [for a board with 2x2 inch / 50mmx50mm fieldsize]

Chess Dubrovnik Set - mod easy-print Kingsize 3.75" (FIDE)
 

(for a board with 2x2 inch / 50mmx50mm fieldsize)

Chess #Dubrovnik #Staunton
 

////////////////////////////////////////////////////////////////////////////////

The set - except of the knight - is a remake (redrawn in Fusion360) of the "Classic Dubrovnik Chess Set".

To make it 3D printable in an easier way, i slightly modified the overhangs with slopes at 50deg angles.

The print needs very few support material - you'll see.

The figures are hollowed out a bit to allow the insertion of metal rods or balls + resin.

//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////

The Knight is from::

https://cults3d.com/en/3d-model/game/chess-set-dubrovnik-1950

Have fun!

///////////////////////////////////////////////////////////

https://www.paypal.com/paypalme/satch5150

///////////////////////////////////////////////////////////