MKS GEN L Housing for FLSUN CUBE or other 2020 frames
Description
PDFI have designed this housing because the original mount plate won't keep airflow away from the printing bed. This design can be mounted in a way that it redirects exhaust air away from the printer.
This housing can hold a MKS GEN L V1.0 controller board and a common heatbed relay. There's also some room left to hide the extra length of the cables.
For cooling, an 80mm fan is used.
The base comes in 2 variants. You need only one: "MKS Housing Base" or "MKS Housing Base simple"
For the fan grille, you can find mroe designs here: https://www.thingiverse.com/thing:2813669
Print Settings
Printer:
FLSUN CUBE
Rafts:
Doesn't Matter
Supports:
No
Resolution:
Doesn't matter
Infill:
Use 100% for maximum stiffness
Post-Printing
Part assembly
1) Mount the the controller board (and relay board if needed) on the "MKS base".
2) Mount the "MKS base" on your printer frame.
Snap the "MKS housing frame" on the "MKS base". Use some glue if needed.
Assemble your 80mm fan with "MKS grille" and "MKS cover".
Mount the "MKS cover". If you need some more distance of the cover to your controller board, you can add the "MKS sleeves" as a spacer.
Tags
Model origin
The author marked this model as their own original creation. Imported from Thingiverse.