Hinge pin for Flymo Turbo 400 lawnmower
A replacement hinge pin for the Flymo Turbo 400 lawnmower. The original kept falling out so I designed this one.
4
43
0
308
updated
May 27, 2022
Description
PDFA replacement hinge pin for the Flymo Turbo 400 lawnmower. The original kept falling out so I designed this one.
Print Settings
Rafts:
No
Supports:
No
Resolution:
~0.2
Infill:
50% or more
Filament: any PETG or PC original is black
Notes:
Keep the orientation, no supports are needed.
This needs to be strong, so adjust the following setting in your slicer:
- Print slightly hotter than usual, in the top range for your filament
- Set wall thickness to at least 2 mm and add a lot of infill
Post-Printing
The part is slightly oversized, so you may have to tap it with a hammer to insert. This is intentional to prevent it from falling out like the original does.
Custom Section
The woderful picture is from the Flymo website with my edit ;)
Tags
Model origin
The author marked this model as their own original creation. Imported from Thingiverse.