2" eypiece extension 35mm

35mm extension for 2" telescope focuser and 2" eyepiece. It does not require lock screws but locks the eyepiece by turning the nut. (similar to Baader Quick-Lock)

settings:

• Pre-settings Prusament PLA
• Material: PLA
• layer hight: 0.15mm (Quality)
• infill: 25% Gyroid
• wall thickness: 4

important hint:

• for me it worked with the first print/design. this might not go fo other printers/materials-
• for the thread it was necessary to add some silicone grease, otherwise the friction was too high.

my summary:

I would not build it in the same way again because it needs too many turns to lock the eyepiece.