Elegoo Mars 2 to ANycubic Wash-Cure Adapter

Remix of the Elegoo Mars to Anycubic wash and cure station adapter. It was too big for my plate holder, and other remixes were too small, and the lock screw wouldn't clamp securely to the adapter.

I shaved off 1mm of each side, 1.5mm off the bottom, and added 1.5mm to the height of the channel (to make up for the 1.5mm thickness I removed.

Fits nicely, and the lock screw holds the plate assembly tightly.

Print Settings

Printer Brand:

Prusa

Printer:

Mk2.5s

Supports:

No

Resolution:

.2mm layer height