SPACE SHUTTLE

Support Me

     Support my work by subscribing to my Printable club to have access to my new model, my first lander, the Titan 3C.

     You can also have access to the multi-material version of the Space Shuttle.

UPDATES:

• 22/11/2023
  • Added a better printing and assembly guide.
  • New stand that requires less material.
  • Rename files.

Description

     The Space Shuttle "Space Transportation System, STS" model is a highly detailed 1:200 scale reproduction of NASA's historic reusable vehicle that first flew in 1981 for 135 flights. 

      The model consists of several separately printed parts, which are easy to print and assemble.

     The finished model dimensions are approximately 28cm high and 18cm wide for the Space Shuttle.

     There are 80 pieces to print ,the total printing time for the entire model is approximately 40 hours.

Choosing your configuration KIT.

     There are multiple configuration options available for this model, depending on your printing and assembly preferences. (The download files contain what is needed for each configuration.)

     We offer 5 configuration for 3 kit: 

Kit Fuselage

• CutFuselage (CF)
  • 🔼Small printer (max. height 14cm)
  • 🔼Easy to print
  • 🔽Large quantity of parts
  • 🔽Less good finish
• Fuselage (F)
  • 🔼Small printer (max. height 14cm)
  • 🔼Good finish
  • 🔼Medium number of parts
  • 🔽Medium printing difficulty
• FullFuselage (FF)
  • 🔼Small printer (max. height 16cm)
  • 🔼Excellent finish
  • 🔼Small quantity of parts
  • 🔽Major printing difficulties

Kit Solid Rocket Booster SRB

• CutBooster (CB)
  • 🔼Small printer (max. height 13cm)
  • 🔼Easy to print
  • 🔽Medium number of parts
  • 🔽Less good finish
• FullBooster (FB)
  • 🔼Excellent finish
  • 🔼Small quantity of parts
  • 🔼Easy to print
  • 🔽Large printer (max. height 22cm)

Kit Stand

• CutName (CB)
  • 🔼Easy to print
  • 🔽Large quantity of parts
• FullName (FB)
  • 🔼Excellent finish
  • 🔼Small quantity of parts
  • 🔼Easy to print

 Other configuration  

     You can choose to print only the orbiter and use my orbiter support

Assembly and Printing Guide

     You can use the assembly guide published on Instructables to help you assemble the Space Shuttle.

Tips

Settings

• For infill, 10% is sufficient for a decorative object, and you can also use PrusaSlicer's "Lightning" infill settings. 
• For some parts the supports will be necessary, see the Assembly and Printing Guide.
• If some parts are loose or don't fit, you can change the scale by +/- 1% in the slicer to get a better fit. 

Printing

• For a better final result, I recommend printing the Jonction_Block last so that you can adjust their size according to your print and have a better fit during assembly. 

Post Printing

• You may need to sand the junction areas between the parts for a smoother finish.
• Additionally, I recommend using glue for better strength and durability.