Friend Asked for a Tool stand for RC wrenches. This will hold all sizes of MIP tools. 4 of larger orange or Black handle wrenches. 3 of the smaller handled wrenches and 2 medium ones( newer ball drivers). 3 Turnbuckle wrenches,Sharpie or X-acto Knife combinations. 4 speed bits. Small parts tray holds misc parts. around 162 mm wide 43mm tall 121mm deep. Does not have the 1up logo on face something i was playing with for next version still needs more tinkering.
Also added a blank insert plate you can drop in logos or names. I do not have a multi material. Printed this on single extruder at .2 The one pictured is 6 different prints leaving them attached to build plate. There are probably easier ways to do this. Print order was Red,White,Silver,Yellow,Black and backed with White insert cover, Printed the insert and logos flip 180 so its butter smooth.
Insert Cover has a small tab to lift off build plate .2 mm only way i could think of to raise this. I cut off tab after print and sand all edges to make it fit.
All default Silc3r PE default settings for PLA used 75% speed off printer was around 13 hour print.
Started adding color changes really makes them pop found color changes at 9mm 10.2mm 40.2mm looked real sharp. This gives the tray lip and rings on top different color Also played around adding color changes every 10mm in main body for 1mm stripes looked sharp.
Will be adding HUDY tool one soon.
New layout add color changes at 7.4, 8.8, 10.2, 39.2, 41 looks pretty killer ghosted AE logo not included
Added 1Up racing oil and lube holder one also This is the one i use but in Hudy tools
2-12-2020 Added multi material stl's
Unassociated tags: tool holder, tool stand
Printer Brand: Prusa
Printer: i3 MK3
Rafts: No
Supports: No
Resolution: .2
Infill: 15
Filament: Prusament PLA Galaxy Black
The author marked this model as their own original creation. Imported from Thingiverse.