iPhone 13 Pro Case

A 3d printable case for iPhone 13 Pro. Designed to be printed mostly in TPU, you can also use a filament swap a few layers in to get a ridged back. The back is thicker than normal to accommodate the camera bump without having a ridge around it or feet. It's probably thick enough to make a cavity for MagSafe stickers, but I didn't have any to try.

Printed in Sunlu CF PLA for 4 layers, then Ovature 95a TPU for the rest. Printed with 3 walls, 5 top and bottom layers, and 60% cubic infill.

Update 2/1/2025:

Refined the geometry to make it more printable, fixing the uneven bottom surface that was a fusion export issue, making the lower taper an angle rather than a radius, and thinning out the case a bit. Also added an optional version that has some cutouts for some metal inserts. This is designed for the EvuTech magnetic mount, as I have had a few cases with those inserts. They are 10mmx20mmx1.4mm pieces of stamped steel. I got mine from an old case I cut apart.