Spice Rack

This is a 4x spice rack designed to hold either Choice 7oz Flat Top Containers or Choice 7oz Pour Top Containers.

The print is designed to be straight forward; just place on the bed like the attached image. no supports or post processing needed. I printed in ABS and PC, but PLA, PETG, or other stiff materials should work fine.

If mounting to the inside of a cabinet I recommend using Gorilla Double Sided Tape

Other tapes like 3M VHB have failed after a few months of use. So use with discretion.

There are also screw holes if needed for other applications.

Print Settings

Printer:

Voron 2.2

Rafts:

No

Supports:

No

Resolution:

0.3mm

Infill:

20% Gyroid

Filament:

Grey

Notes:

Printed with 4 Walls