Muscle engine for the Motorized Lift 2021 edition (v4)

This design was created by an idea of Valentin. He suggested making a version that didn't require electricity to power the lift.

This is the result of several tries and prototypes to get this done.

Thanks Valentin! And have fun spinning :)

Note: you will need the last lift base (v105, the one with the groove at the bottom) as this will ensure that the base remains securely attached to the part.

Assembly instructions:

1.Large axis goes into thespur gear 45 2. Place in thebase 3. PlaceSpur gear 15 inbase 4. Slide thelift motor base (get from Motorized Lift 2021) into the ridges of thebase 5. Drop in themotor base filler 6. Insertsmall axis intomotor triangle 7. Insert thesmall axis assemble into thespur gear 15 through thelift motor base 8. Cover the gears withgear cover 9. Click on thelever to the end of thelarge axis

First attempt at an assembly instruction video https://youtu.be/kIco5bZKtXA

Print Settings

Printer Brand:

Creality

Printer:

CR-10

Rafts:

No

Supports:

No

Resolution:

0.2

Infill:

15

Filament: REAL PLA