Universal print in place box

Magnetic Print-in-place Box

Created with Fusion360, optimized for 0,2mm layer height and 0,4mm nozzle.
Add some custom supports on the inside for better bridges(Check the picture). 

You need:

• 6*3mm Neodym magnets 2x
• soldering iron 
• superglue

I've heated up the magnets with the soldering iron and put some superglue in the holes before putting the magnets in the hole.

Uploaded every size as 3mf, so they can be easily printed in different colors.

Any suggestions for improvement? Komment and let me know!