Bouldering Brush - Fully 3D Printed!

Check out the Bouldering brush v2!

I decided to make make a fully 3d printable brush design that can be adapted by future designs.

In this first batch of brushes I will release a Bouldering/Climbing Brush, a Nail Brush, and a small Test Brush.

The brushes print in about 4 hours, (test brush around 30 min).

Use a 0.4 mm nozzle(and 0.4 mm line width), and 0.2mm layer height.

Please watch the video for more information!

Link to the Nail Brush

Feel free to leave any questions or comments!

Check out my social media for sneak peaks and memes: YouTube Facebook Instagram

Update 23.01.2019

• Woo Hoo! BOW! Thankyou!
• ConfusedPrinter Found that when printing with PETG, one has to use the cooling fan to get reliable bridging. - More testing needs to be done to find the perfect fan speed, however at 100% fan speed the print definitive succeeds!

Update 16.01.2019

Thank you to HACKADAY for featuring my design, for people interested in the blog entry, see: Link

Print Settings

Rafts:

No

Supports:

No

Resolution:

0.2

Infill:

20

Notes:

0.4mm Nozle

0.4mm Line Width