Suzuki DL650 v-strom blinker/turn signal housing

This is a Suzuki DL650 V-Strom blinker housing, that easily brakes when the bike falls :)

Very big thanks for "remote" creating the modell toBarbér Máté.

Print Settings

Printer:

prusai i3 rework 1.5

Rafts:

No

Supports:

Yes

Resolution:

0.1-0.2

Infill:

30

Notes:

I printed from ABS but maybe it is good from PETG too...

Remove supports, check for the holes for the 2 screws. If neccessary use a drill.