308 Winchester Safety Flag

Based on the 308 round model by is-serp, this round has a slightly muted tip to help prevent printing issues with a standard 0.4mm nozzle. Safety flag added using Blender.

When using a firing range, the range-master may call for all firearms to be made safe. Clearing your rifle and inserting this safety-flag round clearly indicates to the range-master that your firearm is safe.

I print this with 3 walls with 40% gyroid infill at  .15mm layer height to ensure strength. Print with a brim to ensure stability due to height. Be sure to print in BRIGHT RED OR ORANGE!

Take GREAT CARE not to jam the dummy in your chamber. Any jams need to be dealt with by a reputable gunsmith.