Fuzzy Skin & Custom Infill Based Sponge/Soap Dish

To print the main SOAP DISH BODY part use Fuzzy skin to get a nice texture. I suggest these settings if you want light texture:

Fuzzy skin: All walls

Fuzzy skin thickness: 0.15mm

Fuzzy skin point distance: 0.25mm

To print the INFILL STYLE MESH part you need to disable the bottom and top layers (set to 0) and ideally use 2.4mm total wall thickness. Then you can play with the different styles and densities to get the pattern you like! To make mine I used 10% Gyroid infill.

I also added the Fusion360 file if you want to customize it further.