Skadis Flower Pot

This is a simple flower pot based on CSD Salzburg's 80mm container. To build it you need:

• 2x CSD Salzburg's container hook (included in files)
• 1x CSD Salzburg's container 80mm (included in files)
• 1x The flowe pot
• 2x The foot
• 2x The clip

To assemble everything just put the feet with the wide part on top through two of the holes and mount them with the clips. The feet allow excess water to run through the soil and to be collected in the container. This prevents the soil from fouling.

I cheated and printed the inner part with cheap red PLA I had lying around and changed to the nice one for the visible top part :P

Print Settings

Supports:

No

Resolution:

0.2-0.28