Spool Holder For Anycubic Mega S,X, and Chiron

There are quite a few spool holders for the Anycubic Mega S. I wanted something that could simply fit over the existing spool holder without any assembly/disassembly. It is a nice tight fit and works perfectly.

Using .2 layer height @ 60mm/s, it took about 5 hours to print but snapped on first try with a little pressure.

I printed it with the text facing up and used supports for the "upper" lip. The supports came off easy with 1mm XY gap and a 0.2mm Z gap.

I have included 3 different inner diameter sizes. If you need a specific size for your spools let me know and I'll resize it for you

• I added oversize spool holders for 73mm, 53mm, and 50mm.

** I'm pretty sure these work with the Chiron and Mega X as well. Please let me know if they don't.

Print Settings

Printer Brand:

Anycubic

Printer:

All-metal Mega

Supports:

Yes

Resolution:

.2 Layer Height

Infill:

10%

Filament:

Grey

Notes:

• If I end up getting different size spools I will make them as well.