Webcam Mount for Artillery Sidewinder X1

I was looking for a mount that I could adjust the camera, was not attached to the XZ gantry due to weight concerns and wanted to get rid of the bulky stock mount on the c920 camera.

After collecting all of the things that had features I liked I did a smash-up of them all using Fusion 360. A lot of the pieces were remade.

I did print this and I am using it, I will upload at a later date. When slicing you will need support material for the camera mount piece for the internal cavity. You can see how I positioned the parts when I sliced them. Make sure you print the stand with the flat side of the ball facing the build plate.

I used one of the screws and nuts from my gopro like the on in the picture.

You need to find information online on how to disassemble the webcam to change out the stock mount for this new mount.

If you use the c920 there is a modification you can find online that fixes the auto-focus for the close up distance.

Print Settings

Printer:

Artillery Sidewinder X1

Rafts:

Doesn't Matter

Supports:

Yes

Resolution:

.2

Infill:

20%

Filament:

Black