1986 - 1989 TRX Foreman/Fourtrax Reserve Fuel Tank Lever

This works as a replacement reserve fuel valve petcock lever with part number: 16952-HA7-880ZA.  I built the model with a sacrificial 0.2 mm layer where the hole transitions in order to force the slicer to build a bridge there.  Just poke through it when complete.  The square recess on the back is purposely undersized so as to provide a strong grip on the petcock valve.  If you have difficulty pushing it on, use a blow dryer or similar to heat the piece a bit, then try again.

The user print file was tailored to use Protopasta PETG.  Configure according to your preferred settings.

Print Settings:

layer height: 0.2 mm

perimeters: 5

fill density: 40%

Do not use supports.