Cajitas! - Minimal Modular Boxes - Cajas mínimas modulares

Hello everyone!

This is a system of modular boxes, lids (and future surprises) that are both handy and minimal in their filament requeriments. Those two features were the main design goals behind this little proyect.

The idea was to create an item that can always can come in handy, so those last meters of filament wont feel like a waste, nor a print that you would not print in other case. And because it's a modular system, you can always make more and create cool stuff, like a custom desktop organizer or a small bolts and nuts organizer to put inside a toolbox.
 

Current base components of the system:

• Base box 50x55 x20mm (7g - 2.3m filament used)

Current expansion components of the system:

• Just walls 50x55 x20mm (5g - 1.8m filament used)
• Lid for base box 50x55mm  (2g - 0.7m filament used)
   

The current version is V4, ensure your bed is leveled prior printing because this is a minimal print, every layer counts!

0.2 Layer height
No infill
No brim
Skirt: max 1 line, so you don't waste material ;)

Any feedback is welcome!