Case for mATX MotherBoard

Optimised for 0.4mm nozzle.

The internal structure must be in ABS with at least 20% infill and the outer part in PLA.

You must need to split the outer part because of the height so theres is a ring to connect the parts.

The io shield, in my case, does not need glue, it is for a ga-h110m-h.

The fan on top is a 140mm.

This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/a4uSMns0fxl

Print Settings

Printer:

MakerFarm i3v

Resolution:

0.3