Under or Inter shelf glass holder

Just the under cabinet holder for glasses.

Various lengths STL included.

Fusion 360 source included. (User-defined fx parameter length)

Print Settings

Printer Brand:

Prusa

Printer:

I3 MK3S

Rafts:

No

Supports:

No

Resolution:

200

Infill:

20

Filament: n/a PETG (less fragile) or PLA white

Notes:

Wood screws, countersink head - thickness approx. 2.8mm, length up to the thickness of the cabinet board.

From the left - PLA, I don't remember params, PETG 0.4mm thickness (two perimeters only), and 2x PETG (this published sturdy design)

If the depth of the shelf is 370 mm and two (or more) rows are needed then imho the best option is to print the 2x 195 and 2x 175 mm and glue all sides together interlaced - the first row long short, second short, then long.

Post-Printing

Some sanding if needed, maybe glue all block together.