PC4-M10 Bowden Guide 2020 Mount

Printing completely solid only takes up to 3m of filament! Two walls with a 0.4mm width takes 1.3m of filament!
53m
1× print file
0.15 mm
0.40 mm
5.00 g
In the contest Last Meters
11
81
2
490
updated May 21, 2022

Description

PDF

A quick print to rigidly mount a bowden or reverse bowden tube to 2020 series extrusions.

I recommend using a socket to thread the coupler into the mount.

PARTS LIST

1x M3x8mm SHCS

1x M3 Hammerhead or Roll-in 2020 tnut

1x PC4-M10 Bowden Coupler

PRINT SETTINGS

No supports

0.1mm to 0.15mm layer height recommended

2-3 shells

20% infill

Takes about 1.3m of filament with these settings, provided MK3S file is about 1.6m of filament

Tags



Model origin

The author hasn't provided the model origin yet.

License