Rocket Lab logo contoured keyring with raised logo.
Simple keyring that can be printed in single or multiple colours.
Keyring is approx 2mm thick with a 1mm extruded logo making it light, sturdy and quick to print with minimal filament.
For best results I recommend printing at 0.10mm or 0.12mm quality.
This particular model should be printed at 0.10mm layer height otherwise you will lose the tip of the R “flame”.
0.20mm may work too but the finish will not be as clean.
(If you wish to print in multiple colours don't forget to add filament changes when slicing the file to make your life easier.)
Perfect for those moments when you have a small amount of filament left!
If you enjoy this print then please do share your make, I would love to see what colours and filaments you chose for your print.
If you have any questions about 3D printing, whether it be queries or you need some tips or tricks feel free to reach out in the comments or by message, I am always more than happy to help if I can!
The author hasn't provided the model origin yet.