A wireless charging cradle to ensure that your phone is always centered correctly - no putting it in the wrong place while half asleep and waking up to a discharged phone!
Designed and tested for the Pixel 6 pro with the Spigen case using a Spigen wireless charger. This design has two cable cutouts so the cable can either come in from the side or from one end.
You'll need a printer that can handle 180mm long models (I used a Prusa Mini), and since it's fairly large and high aspect-ratio you'll want to put steps into place to reduce warping - I turned down my speed for the first centimeter or so, bumped my bed temp up by a couple of degrees, and used a wide brim. You can probably get away without using supports, as the cable cutouts are only 15mm (11mm with the fillets)
The author hasn't provided the model origin yet.