Rise Garden Hole Covers

NOTE : The colors used in the picture are for display purpose only, I don't recommend using them (see bellow)

Description

Lets be honest, you're gonna lose them….the kids are going to lose them, the cat is gonna lose them… So these are replacement hole covers for your pod tray lids.

STL and 3MF included. STL may need to be rotated.

Printing instructions

As the purpose of these is to block light and thus prevent the formation of algea inside your garden, I recommend the following :
 

1. Print at 100% infill ;
2. Use a filament of a darker color and as opaque as possible (mat if possible). I suggest testing one first and check if your garden's LED light can shine trough or not.

Altough I suppose you could also just paint them…

You also have to keep in mind that they will be exposed to a lot of direct lightning and possibly water/moisture so choose your filament material accordingly (ABS, ASA are the best I think).